Utas Gauge kanggo sucker rod lan tubing
Sucker Rod Utas Gauge
| Spesifikasi | GYG 16(5/8") | GYG 19(3/4”) | GYG 22(7/8") | GYG 25(1") | GYG 29(11/8") |
| Pengukur Plug Kerja (T/Z) | B2, B6 | B2, B6 | B2, B6 | B2, B6 | B2, B6 |
| Setelan Plug Gauge (T/Z) | P7, P5 | P7, P5 | P7, P5 | P7, P5 | P7, P5 |
| Pengukur Ring Kerja (T/Z) | p8, p6 | p8, p6 | p8, p6 | p8, p6 | p8, p6 |
| Master Ring Gauge (T/Z) | B1, B5 | B1, B5 | B1, B5 | B1, B5 | B1, B5 |
Straight Thread Gauge Series
| Utas Metrik Biasa | M1.0~M300 |
| Unified Thread Standard (UTS) | UNC,UNF,UNEF,UN,UNS |
| Utas Whitworth | BSW/BSF/Whit.S/Whit. |
| Metrik Aerospace Thread | MJ |
| Unified Inch Aerospace Thread | UNJ |
| Benang Trapezoid Metrik | Tr |
| Unified Inch Trapezoidal Thread | ACME, STUB ACME |
| Utas Buttress Inggris | BSButtress |
| Unified Inch Buttress Thread | BUTUNG |
| Inggris lan Unified Inch Pipe Thread | 55°R,G/60°NPT |
| Utas Katup Tekanan Balik | Seri HBPV |
| Seri Utas Non-standar liyane |
Tajam Vee Thread Gauge
| SHARP VEE TUBING UPSET / NON -UPSET | |||||
| Ukuran Nominal | O.D | UPSETTPI (Teeth Per Inch) | NON -UFSETTPI (Gigi saben inchi) | T.PF(Taper in/ft) | |
| 1-/4 | 1.660 | 11-1/2 | - | 3/4 | 1:16 |
| 1-/2 | 1.900 | 11-1/2 | 11-1/2 | 3/4 | 1:16 |
| 2 | 23/8 | 10 | 11-/2 | 3/4 | 1:16 |
| 2-1/2 | 27/8 | 10 | 11-1/2 | 3/4 | 1:16 |
| 3 | 31/2 | 10 | 11-1/2 | 3/4 | 1:16 |
| 3-1/2 | 4 | 10 | 10 | 3/4 | 1:16 |
| 4 | 41/2 | 10 | 10 | 3/4 | 1:16 |
Pengukur Utas Khusus
| Double Step Seal High Torque Resistance Series Thread Gauge | |
| Pengukur Utas Seri AMMT | 1 MMT, 11/2AMT |
| Nomer Khusus, Pengukur Utas Seri Sambungan Reguler | NC33, NC36, NC52, NC53, 63/4REG, 73/4REG |
| Pengukur Utas Seri Trapezoid Offset Khusus | 27/8 BCSG, 31/2 BCSG, 4 BCSG, 71/8 BCSG, 77/8BCSG |
| Inti Rod Metrik Utas Gauge | φ114.3, φ89 |
| Screw Drill Tool Series Thread Gauge | 8 7/8-4 1:8, 6 3/4-4 1:9, 7 1/8-4 1:12, 6 3/4-6 1:16 |
| Rod Pengeboran Non-penggalian, Tambang Batubara, Pengukur Utas Metrik Batang Bor Geologi | D80, D33, CASE6030, φ42, φ60, φ73 |
| Multi-wiwitan Thread Series | |
| Pitch Khusus liyane, Taper, Sudut Flank, Pengukur Utas Seri Diameter Jarak | |
API SPEC 5B
| BCSG | CSG | TBG/NUE | UPTBG /EUE | LP |
| 4 1/2" BCSG | 41/2" CSG | 1.050" TBG | 1.050" UPTBG | LP 1 1/4" Kab |
| 5" BCSG | 5" CSG | 1.315" TBG | 1.315" UPTBG | LP 1 1/2" Kab |
| 5 1/2" BCSG | 5 1/2" CSG | 1.660" TBG | 1.660" UPTBG | 2" LP |
| 6 5/8" BCSG | 6 5/8" CSG | 1.900" TBG | 1.900" UPTBG | 2 1/2" LP Kab |
| 7" BCSG | 7" CSG | 2 3/8" TBG | 2 3/8" UPTBG | 3" LP |
| 7 5/8" BCSG | 7 5/8" CSG | 2 7/8" TBG | 2 7/8" UPTBG | 3 1/2" LP Kab |
| 8 5/8" BCSG | 8 5/8" CSG | 3 1/2" TBG | 3 1/2" UPTBG | 4" LP |
| 9 5/8" BCSG | 9 5/8" CSG | 4 "TBG | 4 "UPTBG | 5" LP |
| 10 3/4" BCSG | 103/4" CSG | 4 1/2" TBG | 4 1/2" UPTBG | 6' LP |
| 11 3/4" BCSG | 11 3/4" CSG | - | - | 8" LP |
| 13 3/8" BCSG | 13 3/8" CSG | - | - | 10" LP |
| 16" BCSG | 16" CSG | - | - | 12" LP |
| 18 5/8" BCSG | 1 85/8" CSG | - | - | 14D LP |
| 20" BCSG | 20" CSG | - | - | 16D LP |
SPESIFIKASI API 7-2
| NC | IF | FH | REG | H90 | SLH90 | PAC | GOST | SH | WO | XH | |
| NC10 | NC40 | 23/8" IF | 27/8" FH | 1" REG | 31/2" H90 | 23/8" SLH90 | 23/8" PAC | Z161 | 23/8" SH | 23/8" WO | 27/8" XH |
| NC12 | NC44 | 27/8" IF | 31/2" FH | 11/2" REG | 4" h90 | 27/8" SLH90 | 27/8" PAC | Z189 | 4" SH | 27/8" WO | 31/2" XH |
| NC13 | NC46 | 31/2" IF | 4" FH | 23/8" REG | 41/2" H90 | 31/2" SLH90 | 31/2" PAC | 31/2" WO | |||
| NC16 | NC50 | 4" IKI | 41/2" FH | 27/8" REG | 5" h90 | ||||||
| NC23 | NC56 | 41/2" JIKA | 51/2" FH | 31/2" REG | 51/2" H90 | ||||||
| NC26 | NC61 | 51/2" JIKA | 65/8" FH | 41/2" REG | 65/8" H90 | ||||||
| NC31 | NC70 | 65/8" JIKA | 51/2" REG | 7" h90 | |||||||
| NC35 | NC77 | 65/8" REG | 75/8°H90 | ||||||||
| NC38 | 75/8" REG | 85/8" H90 | |||||||||
| 85/8" RE G | |||||||||||
