Skid-Dipasang Drilling Rigs
katrangan:
Kontrol siji-kanggo-siji dirancang kanggo sistem VFD lan kontrol siji-kanggo-loro dirancang kanggo sistem SCR., Kontrol intelektual saka driller liwat rig pengeboran bisa diwujudake dening sistem PLC lan desain terpadu tutul parameter layar gas, listrik, cairan, lan instrumentasi pengeboran.
Mast K-jinis lan substruktur swing-up / sling-shot nduweni stabilitas sing apik lan nyedhiyakake ruang kerja sing gedhe. Mast lan peralatan ing lantai pengeboran bisa dipasang ing lemah lan diunggahake sacara integral.
Struktur modul skid bisa nggawe kabeh unit banget kompak lan cepet kanggo gerakan, kang bisa nyukupi syarat kabeh-unit-trucked transportasi lan cluster-jinis-well drillings.
Draw karya bakal mimpin dening gear poros siji karo imbuhan kacepetan non-langkah. Transmisi kasebut gampang lan dipercaya.
Karya tarik kasebut dilengkapi rem cakram hidrolik lan rem konsumsi energi-motor, lan torsi rem bisa dikontrol liwat komputer.
Pakan bit otomatis dilengkapi kanthi individu kanggo ngawasi wektu nyata babagan proses dropping lan proses pengeboran DP.
Langkah-langkah safety lan inspeksi dikuatake miturut tuntunan konsep desain "Humanisme Ndhuwur Kabeh" kanggo nyukupi syarat HSE.
Model lan paramèter saka Drilling
| Model rig pengeboran | ZJ30DB | ZJ40L/J | ZJ50L/J/LDB | ZJ70LDB/L/D | |
| m Kedalaman pengeboran nominal | 114mm（4 1/2”） DP | 1600-3000 | 2500-4000 | 3500-5000 | 4500-7000 |
| 127mm（4 1/2”） DP | 1500-2500 | 2000-3200 | 2800-4500 | 4000-6000 | |
| Maks. beban kait, KN(t) | 1700 | 2250(225) | 3150（315） | 4500（450） | |
| Kacepetan pancing, m/s | 0.22-1.63 | 0.21-1.35 | 0.21-1.39 | 0.21-1.36 / 0.25-1.91 | |
| Line strung saka sistem hoisting | 10 | 10 | 12 | 12 | |
| Diameter garis bor, mm | 29 | 32 | 35 | 38 | |
| Maks. narik garis cepet, KN | 210 | 280 | 350 | 485 | |
| rem | Mode | JC30DB | JC40B/J | JC50B | JC70B/DB |
| Rating daya KW(HP) | 400(600) | 735(1000) | 1100（1500） | 1470(2000) | |
| Kacepetan | 4F | 6F+1R | 4F+2R | 6F(4F)+2R | |
| Rem utama | Rem cakram hidrolik | ||||
| Brack bantu | Eddy rem | ||||
| Blok mahkota | TC170 | TC225 | TC315 | TC450 | |
| Blok lelungan | YC170 | YC225 | YC315 | YC450 | |
| Sheave OD sistem angkat, mm (in) | 1005（40） | 1120（44） | 1270（50） | 1524（60） | |
| PAKET | YG170 | DG225 | DG315 | DG450 | |
| Puteran | Mode | SL170 | SL225 | SL450 | SL450 |
| mm | 64 | 75 | 75 | 75 | |
| Dhiameter batang | 520.7(20 1/2) | 698.5(27 1/2) | 698.5(27 1/2) | 952.5(37 1/2) | |
| Tabel Rotary | kacepetan mbukak Tabel | ||||
| L | |||||
| Mode drive | motor VFD | ||||
| mast | Jinis | K | K | K | K |
| Dhuwur, m | 42 | 43 | 45 | 45 | |
| beban maks, KN | 1700 | 2250 | 3150 | 4500 | |
| Substruktur | Jinis | kothak | kothak | Tingkat ngarep, swing lift; tingkat mburi, kothak | |
| Dhuwur lantai, m | 4.5 | 6 | 7.5/9 | 10.5 | |
| dhuwur cetha, m | 2.9 | 4.8 | 5.72/7.4 | 8.9 | |
| Pompa lumpur | Model x nomer | F-1300x1 | F-1300x2 | F-1300x2 | F-1600x2 |
| Mode drive | drive senyawa | ||||
| Mode penggerak listrikrotarytabel,kw | AC-DC-AC utawa AC-SCR-DC, siji kanggo siji kontrol | ||||
